Center for Advanced Friction Studies

Titles Published in Scientific Journals

1. Ozcan S., Farhang K., Filip P.,: Assessment and verification of a novel method for near surface measurement of mechanical properties. Journal of Tribology, Volume 129, Issue 2, pp. 314-320.

2. S. M. Aouadi, Y. Zhang, P. Basnyat, S. Stadler, P. Filip, MWilliams, J. N. Hilfiker, N.
Singh and J. A. Woollam: Physical and chemical properties of sputter-deposited TaCxNy
films, J. Phys.: Condens. Matter. Vol. 18, 2006 1977–1986.

3.    S.M. Aouadi, P. Basnyat, Y. Zhang, Q. Ge & P. Filip: Grain boundary sliding mechanisms in
       ZrN-Ag, ZrN-Au & ZrN-Pd nancomposite films, Applied Physics Letters. Vol. 88, 2006,
       021902- 1 / 021902-3.

4.    Z. Weiss, J.C. Crelling, G. Martynkova, P. Filip: Identification of carbon forms and other
       phases in automotive brake composites using multiple analytical techniques, Carbon. Vol. 44,
       2006, 792-798.

5. P. Filip and S. M. Aouadi: Microstructure and Related Properties of Nanocomposites for
       Tribomedical Applications, Microscopy and Microanalysis. Vol. 11 (Suppl. 2), 2005, 1076.

6. S. Ozcan, P. Filip: Microstructure and wear mechanisms in C/C composites, Wear. Vol. 259,
       2005, 624-650.

7. K. W. Hee, P. Filip: Performance of ceramic enhanced phenolic matrix brake lining materials
       for automotive brake linings, Wear. Vol. 259, 2005, 1088-1096.

8.    M. Paliwal, A. Mahajan, J. Don, T. Chu, and P. Filip: Investigation of high frequency
       squeal in a disc brake system using a friction layer-based coupling stiffness, Journal of
       Mechanical Engineering Science. Vol. 19, 2005, 513-522.

9. M. Paliwal, A. Mahajan, J. Don, T. Chu, and P. Filip: Noise and vibration analysis in a disc
       brake system using a stick-slip friction model involving contact stiffness, Journal of Sound and
       Vibration. Vol. 282, 2005, 1273-1284.

10.  S.M. Aouadi, T. Maeruf, M. Debessai, P. Filip: Zirconium nitride/nickel nanocomposite       structures, Vacuum. Vol. 79, 2005, 186–193.
11. M Debessai, P. Filip, S. M. Aouadi: Niobium zirconium nitride sputter-deposited      protective coatings, Applied Surface Science. Vol. 236 (1-4), 2004, 63-70.

12. P. Filip, M. Paliwal, and K. Mazanec: Fatigue Crack Propagation in Pseudoelastic TiNi
       Smart Microarticles, Zeitschrift fur Metallkunde. Vol. 95, 2004, 356-361.

13. S.M. Aouadi, M. Debessai, P. Filip: Zirconium Nitride/Silver Nanocomposite    Structures, J. Vac. Sci. Technol B22, 2004, 1134.

15. M. Kristkova, P. Filip, Z. Weiss: Hydratation Properties of Vermiculite in Phenolic
       Resin Friction Composites, Applied Clay Science. Vol. 25, 2004, 229-236.

16. M. Kristkova, P. Filip, Z. Weiss, R. Peter: Influence of Metals on the Phenol-
      Formaldehyde Resin Degradation in Friction Composites, Polymer Degradation and       Stability. Vol. 84, 2004, 49 - 60.

17. P. Filip, K. Mazanec: Fatigue Behavior of Pseudoelastic TiNi Thin Strips in Air and     Body Fluid Simulated Environments, Kovove Materialy (Metallic Materials)
    Vol. 41, 2003,300 – 312.

18. P. Filip, Z. Weiss, D. Rafaja: On Friction Layer Formation in Polymer Matrix Composite
       Materials for Brake Applications, Wear. Vol. 252, 2002, 189-198.

19. P. Filip, K. Mazanec: On Kinetics of Ti₃Ni₄ Precipitation,Scripta Materialia. Vol. 45,
       2001, 701 - 707.

20. P. Filip, J. Lausmaa, J. Musialek, K. Mazanec: Structure and Surface of TiNi Human
        implants, Biomaterials. Vol. 22, 2001, 2131-2138.

21. P. Filip, K. Mazanec: Investigation of physical metallurgy characteristics of two way
       shape memory effect in TiNi alloy, Kovove materialy (Metallic Materials). Vol. 39, 2001,
       31 – 39.

22. P. Filip: Characterization and development of materials with TiNi shape memory
        alloys, Sbornik vedeckych praci Vysoke skoly banske Technicke university
       Ostrava, XLV, c.1,1999, 1-77.

23. P. Filip, J. Musialek, K. Michalek, M. Yen, K. Mazanec: TiAlV/Al₂O₃/TiNi shape memory
       alloy smart composite biomaterials for orthopedic surgery, Materials Science
        & Engineering A273-A275, 1999, 769.

24. P. Filip, M. A. Wright: Characterization of composite materials for automotive braking
       industry, Practical Metallography, Special issue 30, 1999, 449.

25. P. Filip, K. Mazanec, A. C. Kneissl: Structure investigation of TiNi shape memory alloy
       with R phase transformation and two way shape memory effect,
       Practical Metallography, Specialissue 30,1999, 359.

26. P. Filip, A. C. Kneissl, K. Mazanec: Hodnocení fyzikalně metalurgických vlastností
        hydroxylapatitového nástřiku tvarově paměťové slitiny TiNi. Kovové materiály.
       Vol. 37, 1999, 58 - 66. (Physical Metallurgy properties of hydroxyapatite
       plasma coating on TiNi shape memory alloy, Metallic Materials, Vol. 37, 1999, 58).

27. J. Musialek, P. Filip, J. Nieslanik: Titanium-Nickel shape memory clamps in small
       bone surgery, Arch.Orthop.Trauma Surgery. Vol. 117, 1998, 341.

28. P. Filip, R. Melichárek, K. Mazanec:Hodnocení strukturních charakteristik
        biomateriálu typu TiNi/Al₂O₃/Ti6Al4V,Kovové materiály. Vol. 35, 1997, 6 - 372.
       (Evaluation of structure characteristics of TiNi/Al₂O₃/Ti6Al4V composite biomaterials,        Metallic Materials. Vol.35, 1997, 6 - 372).

29. P. Filip, A. Keissl, K. Mazanec: Physics of hydroxyapatite plasma coatings on Ti/Ni
       shape memory materials, Materials Science & Engineering. A234-236,1997, 422.

30. H. Lorethová, P. Filip, K. Mazanec: Příspěvek ke strukturně metalurgickým
        charakteristikám TiNi materiálů s tvarovou pamětí, Kovové Materiály. Vol. 35, 1997,
       1 - 19. (Contribution to study of structural and metallurgical characteristics of TiNi
       shape memory alloys, Metallic Materials. Vol. 35, 1997, 1 - 19).

31. P. Filip, R. Melichárek, A. C. Kneissl, K. Mazanec: Hydroxyapatite coatings on TiNi        shape memory alloys, Zetschrift fur Metallkunde. Vol. 88, 1997, 2 - 131.

32. P. Filip, D. T. Marx, M. A. Wright: On-Highway Brake Materials Characterization and
        Performance Evaluation, Materially Speaking. Vol. 11, 1997, 2.

33. P. Filip, H. Lorethová, J. Musialek, J. Pech, K. Mazanec: TiNi shape memory clamps
      with optimized structure parameters, Berg und Huettenmaenische Monatshefte. Vol.       142, 1997, 23.

34. Š. Pacholková, P. Filip: Vratný tvarově paměťový jev v TiNi slitinách, Materiálové
        inžinierstvo. Vol. 3, 1996, 1 - 11. (Reversible shape memory effect in TiNi alloys,
       Materials Engineering. Vol.3, 1996, 1 - 11).

35. P. Filip, K. Mazanec: Physical metallurgy of two-way shape memory effect in TiNi
       alloys, International Journal of Material and Product Technology. Vol.11, 1996, 9.

36. P. Filip, J. Musialek, H. Lorethová, J. Nieslanik, K. Mazanec: TiNi shape memory
       clamps with optimized structure parameters, Journal of Materials Science.:
       Materials in Medicine. Vol. 7, 1996, 657.

37. P. Filip, K. Mazanec: The two-way memory effect in TiNi alloys, Scripta Materialia. Vol.
       35, 1996, 349.

38. P. Pacholek, P. Filip, K. Mazanec:Mechanical and metallurgical characteristics of two
       way shape memory effect, Zeszyty naukowe Wyszej szkoly inžynierskej v Opolu,        Mechanika. Vol. 53, 1996, 123.

39. H. Lorethová, P. Filip, K. Mazanec:Hodnocení strukturně povrchových charakteristik
       TiNi implantátů, Zeszyty naukowe Wyszej szkoly inžynierskej v Opolu, Mechanika.        Vol. 52, 1996, 39. (Evaluation of structure and surface characteristics of TiNi implants,        Mechanics. Vol.52, 1996, 39).

40. Š. Pacholková, P. Pacholek, P. Filip, K. Mazanec: Vliv cyklování na parametry
        vratného tvarově paměťového jevu v TiNi slitině, Zeszyty naukowe Wyszejszkoly
        inžynierskej v Opolu, Mechanika. Vol. 52, 1996, 83. (Influence of cycling on two-way         shape memory effect in TiNi alloy, Mechanics. Vol.52, 1996, 83)

41. P. Filip, V. H. Minh, K. Mazanec: Biomateriály na bázi TiNi s plazmovým nástřikem,
       Sbor.vědeckých prací VŠB-TU Ostrava, řada hutnická. Vol. 41, 1995, c.1, 1. (TiNi
       biomaterials with plasma sprayed ceramic coats, Proceedings of Scientific Works of TU
       Ostrava, Metallurgy. Vol. 41, 1995, No.1, 1).

42. P. Filip, A. C. Kneissl: Mechanical properties and related substructure of TiNi shape
        memory alloys, Journal de Physique. Vol. 5, 1995, C8-575.

43. P. Filip, J. Musialek, K. Mazanec: Structure optimization of TiNi orthopaedic implants,
       Journal de Physique. Vol.5, 1995, C8-1211.

44. P. Pacholek, P. Filip, K. Mazanec: Vliv tepelně mechanického zpracování na parametry
       vratného tvarově paměťového jevu v TiNi slitině, Kovové materiály. Vol. 33, 1995, č.3, 129.
       (Influence of thermo-mechanical treatment on two way shape memory effect in TiNi alloy,
       Metallic Materials. Vol.33, 1995, No.3, 129).

45. P. Filip, K. Mazanec: Influence of work hardening and heat treatment on the substructure and
       deformation behaviour of TiNi shape memory alloys, Scripta Metall. et Mater. Vol. 32, 1995,
       1375.

46. P. Filip, K. Mazanec: The evaluation of reactive stresses in TiNi shape memory alloys,
        International Journal Materials and Product Technology. Vol. 10, 1995, Nos.1/2, 98.

47. P. Filip, A. Kneissl: Substructure characteristics of TiNi shape memory alloys, Praktische
        Metallographie Sonderbd. Vol. 26, 1995, 201.

48. V. Lazar, P. Filip, K. Mazanec: Degradační procesy slitin s tvarovou pamětí typu TiNi v
         průběhu cyklického zatížení, Materiálové inžinierstvo. Vol. 2, 1995, č.1, 8. (Degradation
         processes in TiNi shape memory alloys at cyclic loading, Materials Engineering. Vol.2, 1995,
         No.1, 8).

48. P. Filip, K. Mazanec: The influence of thermal and mechanical treatment on the reactive
         stresses in TiNi shape memory alloys, Journal of Material Processing Technology. Vol. 53,
         1995, 139.

49. P. Filip, K. Mazanec: Vliv tepelného a mechanického zpracování na deformační
        charakteristiky slitin s tvarovou pamětí TiNi, Kovové materiály. Vol. 32, 1994, č.5, 419.
        (Influence of heat and mechanical treatment on deformation behavior of TiNi shape memory
        alloys, Metallic Materials. Vol.32, 1994, No.5, 419).

50. P. Filip, K. Mazanec: Vliv tepelného a mechanického zpracování na strukturu a substrukturu
       TiNi slitin s tvarovou pamětí, Kovové materiály. Vol. 32, 1994, č.4, 335. (Influence of
        mechanical and heat treatment on structure and substructure of TiNi shape memory alloys,
        Metallic Materials. Vol.32, 1990, No.4, 335).

51. P. Filip, K. Mazanec: Influence of work hardening on the reactive stress in a TiNi shape
       memory alloy, Materials Science Engineering. A174, 1994, L41.

52. P. Filip, J. Pech, K. Mazanec: Physical Metallurgy of TiNi Shape Memory Alloys Applied for
        Dynamic Splints, Berg- und Huettenmaenische Monatshefte. Vol. 139, 1994, 174.

53. V. Lazar, P. Filip, K. Mazanec: Wplyw obróbki cieplnej i plastycznej na zjawiska pamieci
        ksztaltu w stopach TiNi, Inžynieria Materialowa. Vol. XV, 1994, Nr.2, 27. (Influence of heat
        and mechanical treatment on shape memory phenomena in TiNi alloys, Materials
        Engineering, Vol.XV, 1994, No.2, 27).

54. P. Filip, A. C. Kneissl: Einfluss von thermischer und mechanischer Behandlung auf die
        Formgedaechtnis -Eigenschaften von TiNi-Legierungen, Berg- und Huettenmaenische
        Monatshefte. Vol. 139, 1994, 17. (Influence of heat and mechanical treatment on shape
        memory properties of TiNi alloys, BHM. Vol.139, 1994, 17).

55. P. Filip, K. Mazanec: Influence of work hardening on the reactive stresses in a TiNi shape
        memory alloy, Materials Science and Engineering. A143, 1994, L19.

56. P. Filip, K. Mazanec: Influence of cycling on the reversible martensitic transformation and
       shape memory phenomena in TiNi alloys, Scripta Metallurgica et Materialia. Vol. 30, 1994,
       67.

57. P. Filip, V. Tomášek, K. Mazanec: Korozní vlastnosti tvarově paměťových slitin TiNi,
      Kovové materiály. Vol. 32, 1994, c.1, 93. (Corrosion properties of TiNi shape memory alloys,
       Metallic Materials. Vol.32, 1994, No.1, 93).

58. P. Filip, V. Bednář: Charakteristiky ortodontických TiNi oblouků denti, jejich srovnání
        s vybranými NiTi oblouky a s ocelovými oblouky, Ortodoncie. Vol. 2, 1993, č.4, 15.
        (Characteristics of TiNi orthodontic arches DENTI, their comparison to selected TiNi arches
        and steel arches, Orthodontics. Vol.2, 1993, No.4, 15).

59. P. Filip, K .Mazanec: Contribution to the study of selected types of high-temperature
        superconductive ceramic materials, Acta Technica ČSAV. Vol. 38, 1993, 429.

60. P. Filip, K. Mazanec: Příspěvek k hodnocení reaktivních napětí ve slitinách TiNi, Kovové
       materiály. Vol. 31, 1993, c.2, 118. (Contribution to the evaluation of reactive stresses in TiNi
       alloys, Metallic Materials. Vol.31, 1993, No.2, 118).

61. N. L. Saini, B. R. Sekhar, P. Srivastava, K. B. Garg, P. Filip, K. Mazanec, J. Rusek,
        P. Kučírek: Study of normal state behaviour and microstructure in YBa2